Showbit with correction mouthpiece and 7-shanks
Mouthpiece width: 5" (12,5cm)

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 10mm
Shank length: 6"This bit comes included the shown curb chain

Metalab bit with Billy Allen mouthpiece, medium port and short shanks
Mouthpiece width : 5-1/8" (13cm)

Square port mouthpiece made from 10mm thick Sweet Iron round material.

The shanks are also made of stainless steel. The upper tree is slightly curved outwards to prevent pressure on the cheekbones. The shanks and the mouthpiece…

Correction with 10mm thick bars made of Sweet Iron. The port with its central ball and the sleeves on the port are made of stainless steel so that no rust-related wear can occur.

The shanks are also made of stainless steel. The…

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 10mm
Shank length: 8-1/4"

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 11mm
Shank length: 7-1/2"This bit comes included the shown curb chain

Mouthpiece Width: 5" (12,5cm)
Copper Mouthpiece
​7-1/2" Shank

Bit with single broken snaffle mouthpiece and D-rings
Mouthpiece width: 5" (12,5cm)

Metalab showbit with Billy Allen mouthpiece, medium port and long S-shanks
Mouthpiece width: 5-1/8" (13cm)

Mouthpiece: 5-1/8" (13cm)

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 10mm
Shank length: 6"This bit comes included the shown curb chain

Bit with single broken snaffle mouthpiece and short shanks
Mouthpiece width: 5" (12,5cm)

Bill Freeman bit with short alu shanks, correction mouthpiece with single ball
Mouthpiece Width: 5" (12,5cm)∙ Bill Freeman stainless bits are made with non-rusting, hand polished 304 stainless steel
∙ High Quality handmade…

Bill Freeman bit with long alu shanks, correction mouthpiece
Mouthpiece width: 5" (12,5cm)
∙ Bill Freeman stainless bits are made with non-rusting, hand polished 304 stainless steel
∙ High Quality handmade bits
∙ Balanced…

Bill Freeman Bit with short alu shanks and correction mouthpiece
Mouthpiece width: 5"
∙ Bill Freeman stainless bits are made with non-rusting, hand polished 304 stainless steel
∙ High Quality handmade bits
∙ Balanced and…

Bill Freeman Bit with long alu shanks and grazer prong mouthpiece
Mouthpiece width: 5"
∙ Bill Freeman stainless bits are made with non-rusting, hand polished 304 stainless steel
∙ High Quality handmade bits
∙ Balanced and…

∙ Jonathan Gauthier snaffle bit
∙ Heavy rings
∙ Copper inlay
∙ Ring: 3"
∙ Mouthpiece thickness: 10mm
∙ Mouthpiece width: 5-1/8" (13cm)

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 8mm
Ring: 2-1/2"

Metalab D-ring snaffle curved with copper inlays

∙ Copper inlay
∙ Ring: 3"
∙ Mouthpiece thickness: 8mm
∙ Mouthpiece Width: 5" (12,5cm)

∙ FG collection twisted snaffle bit
∙ Ring: 2-5/8"
∙ Mouthpiece thickness: 8mm
∙ Mouthpiece width: 5" (12,5cm)

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 12mm
Ring: 2-1/2"

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 10mm
Ring: 2-1/2"

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 10mm
Shank length: 7"

Size: 5" / 12,5cm

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 6mm
Ring: 2-1/2"

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 5mm
Ring: 2-1/2"

Bit with single broken snaffle mouthpiece and D-rings
Mouthpiece width: 5" (12,5cm) or 5-1/2" (14cm)

3 piece offset dee snaffle

Mouthpiece width: 5" or 5.5"
polished “sweet iron”
Stainless steel ringsPlease note: the mouthpiece is made of so-called "sweet iron" and will rust sooner or later depending on use.

Mouthpiece width: 5" (12,5cm)

Showbit with correction mouthpiece and long 7-shanks
Mouthpiece width: 5" (12,5cm)

Size: 5" - 125mm

Loose ring snaffle
Billy Allen mouthpiece
Mouthpiece Width: 11,5cm

Mouthpiece width: 5" (12,5cm)

Tom Balding bit with silverado mouthpiece and long shanks
Mouthpiece width: 5-1/8" (13cm)
Lenght shank: 8" (20,3cm)

Tom Balding bit with single broken twisted snaffle mouthpiece and D-rings
Mouthpiece width: 5-1/8" (13cm)

Tom Balding show bit with correction mouthpiece and K2 schanks finished with flowers
Mouthpiece width: 5-1/8" (13cm)
Lenght shank: 8-1/4"

Tom Balding show bit with Ace of Spade spoon mouthpiece and switchback shanks finished with dots.
Mouthpiece width: 5-1/8" (13cm)
Lenght shank: 8-1/4"

Tom Balding bit with correction spade mouthpiece and long shanks
Mouthpiece width: 5-1/8" (13cm)
Lenght shank: 8" (20,3cm)

Tom Balding bit with single broken snaffle mouthpiece and D-rings
Mouthpiece width: 5-1/8" (13cm)

Tom Balding bit with single broken snaffle mouthpiece and loose rings
Mouthpiece width: 5-1/8" (13cm)

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 10mm
Shank length: 7-1/2"This bit comes included the shown curb chain

Stefanie Bubenzer SS futurity hinged bit. The purchase is turned outwards to avoid any pressure points Extremely soft processed and calm in the horse’s mouth. Specially developed for all-round western sports and made of high…

∙ Finish: Stainless Steel
∙ MP: 5″ Snaffle, Copper
∙ CP: 3″ Loose ring

∙ Finish: Black Satin
∙ MP: 5″ correctional, copper barrels
∙ CP: 8-1/2″ S shank with diamond back trims

Finish: Brushed SS
MP: 5-1/8″ Correctional, Sweet Iron, Copper barrels
CP: 7-1/4" with copper trims

Mouthpiece width: 5-1/8"
Mouthpiece thickness: 11mm
Shank length: 7-1/2"This bit comes included the shown curb chain

∙ Finish: Aluminum
∙ MP: 5-1/8″ Correctional, Sweet Iron, Copper barrels
∙ CP: 8-3/4″ Long shank, Engraved

Bit with balcorrection mouthpiece and engraved long shanks
Mouthpiece width: 5" (12,5cm)

Size: 5 inch

Size: 5" / 125mm

∙ Stainless steel spooned correctional
∙ Flat copper rollers
∙ Size Shank: 5"
∙ Size moutpiece: 7"

D-Ring snaffle bit, with curved bars in sweet iron anatomically shaped and Pinchless system to avoid pinching the tongue of the horse.
Level One
Type of Rider:
• All levels, including beginner
Type of Horse:
• Young, green…

Correctional

Mouthpiece width: 5"
polished “sweet iron”
Stainless steel shanks
Please note: the mouthpiece is made of so-called "sweet iron" and will rust sooner or later depending on use.

∙ Hinge Port Bit
∙ Pro Roller Mouthpiece
∙ Short Shanks
∙ 12,5cm

Loose ring snaffle
Curved mouthpiece
Pinchles technology
Mouthpiece width: 14cm